Safety technology and maintenance of screw oil press
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2022-05-12
- Views:
(Summary description)Safety technology and maintenance 1. If the oil press is forced to stop due to excessive drying of the blank, the press cage must be disassembled, the pressed blank must be chiseled, and then re-installed before starting the vehicle again. Do not tighten the belt or add rosin powder. After driving again, this will inevitably cause major damage to the oil press. 2. The school cake head should be cleaned in time to deal with the accumulated cake to avoid blockage. 3. If there is no meal in the school cake part or when replacing the pressing screw and bushing, because the hole and the shaft have been blocked by the oil meal, you must be careful not to knock hard, so as not to damage the parts, you can put the whole part on the fire to grill. After the oil meal is melted, it can be removed, but the barbecue temperature should not exceed 300 ℃ in general, so as to avoid the loss of surface hardness of screw pressing and annealing ring
Safety technology and maintenance of screw oil press
(Summary description)Safety technology and maintenance
1. If the oil press is forced to stop due to excessive drying of the blank, the press cage must be disassembled, the pressed blank must be chiseled, and then re-installed before starting the vehicle again. Do not tighten the belt or add rosin powder. After driving again, this will inevitably cause major damage to the oil press.
2. The school cake head should be cleaned in time to deal with the accumulated cake to avoid blockage.
3. If there is no meal in the school cake part or when replacing the pressing screw and bushing, because the hole and the shaft have been blocked by the oil meal, you must be careful not to knock hard, so as not to damage the parts, you can put the whole part on the fire to grill. After the oil meal is melted, it can be removed, but the barbecue temperature should not exceed 300 ℃ in general, so as to avoid the loss of surface hardness of screw pressing and annealing ring
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2022-05-12
- Views:
Information
Safety technology and maintenance
1. If the oil press is forced to stop due to excessive drying of the blank, the press cage must be disassembled, the pressed blank must be chiseled, and then re-installed before starting the vehicle again. Do not tighten the belt or add rosin powder. After driving again, this will inevitably cause major damage to the oil press.
2. The school cake head should be cleaned in time to deal with the accumulated cake to avoid blockage.
3. If there is no meal in the school cake part or when replacing the pressing screw and bushing, because the hole and the shaft have been blocked by the oil meal, you must be careful not to knock hard, so as not to damage the parts, you can put the whole part on the fire to grill. After the oil meal is melted, it can be removed, but the barbecue temperature should not exceed 300 ℃ in general, so as to avoid the loss of surface hardness of screw pressing and annealing ring
Add: No.2, Huangchong Road, Environmental Science and Technology Industrial Park, Yangzhou
Phone: 139 5273 3655 (Mr.Li)
138 1583 0391 (Mr.Li)
Fax: 0514-87832611
E-mail: sales@yzmufeng.com
Website: www.yzmufeng.com
173 5246 5599
431258727@qq.com
Messages 
Copyright: Yangzhou Mufeng environmental protection machinery Co., Ltd SEO 苏ICP备15013086号-1 Power by: www.300.cn